Accessing and configuring the D Link WiFi Range Extender is not that difficult task. You should be logged into the web based configuration utility to perform the essential tasks to run the configuration setup. You first need to run the setup wizard after that update the firmware to the latest version. Then you must head to the change wireless and the network settings. The default IP address that you need to enter in the URL bar to start the process is 192.168.0.50. After you login by adding your user name and password credentials then the home page will be displayed which will show your current status. For any further help needed regarding this, you can also contact our support team.
Resetting the D Link Range Extender to the factory default settings is not a difficult task to perform. If you follow the exact same steps as mentioned in our manual guide then it would not be a hassle for you and you can perform it in minutes. First you need to plug in the DAP - 1320 upside down into the power outlet. You can check the LED color, it will change when you plug in and out the extender. There is a reset pinhole present on the bottom of the extender. You can press and hold reset button for the time span of 10 seconds and then let it go until the LED changes its color. The range extender will then restart and be at the default settings. For any query and support, you can contact our support team via chat and email.